Specs for the Vortex2 Soft

Specification	Vortex2S
Power	160W
Light Zones / Pixels	2
Material	Aluminium / Technopolymer
Light Source	RRGBBW LED
Colour Range	CCT: 2200–15000K, Plus/Minus Green, Hue/Saturation, XY, Gels, Direct RGBW, Effects
CRI / TLCI	Typical 95
Beam Angle	110° half peak angle
Tilt Angle	360°
Photometrics	Open Face 3200K: 5,850 lx / 543.5 fc @ 1m / 3.3ft 1,520 lx / 141.2 fc @ 2m / 6.6ft 700 lx / 65 fc @ 3m / 9.8ft 399 lx / 37.1 fc @ 4m / 13.1ft 258 lx / 24 fc @ 5m / 16.4ft 184 lx / 17.1 fc @ 6m / 19.7ft Open Face 5600K: 5,520 lx / 512.8 fc @ 1m / 3.3ft 1,440 lx / 133.8 fc @ 2m / 6.6ft 662 lx / 61.5 fc @ 3m / 9.8ft 380 lx / 35.3 fc @ 4m / 13.1ft 244 lx / 22.7 fc @ 5m / 16.4ft 177 lx / 16.4 fc @ 6m / 19.7ft
Mounting	4x 3/8” threaded rigging points, 9x LNX sockets
Yoke	Removable quick release yoke; optional centre mount gooseneck accessory available
Filter Rails	2x front-mount filter rails for secondary lenses, diffusers, and accessories
User Interface	High precision digital magnetic encoder, backlit keypad, colour LCD display
Dimming	0–100% with high resolution, super-smooth low end mode
High Speed Capability	Over 5000fps flicker free in High Speed Mode
Synchronization	Sync input for triggering and syncing to camera shutter
Max Ambient Temperature	40°C / 104°F
Cooling	Low noise variable speed fans
Estimated LED Lifespan	50,000hrs, L70
Input AC	100–240V AC, 50/60Hz, Max 1.6A. Neutrik powerCON TRUE1 connector, pass-through capable, US: 20A, EU: 16A
Input DC	48V DC, Max 3.3A. 3-pin XLR connector. Can run at 100% brightness on DC input
Protection Class	IP65
Weight	5.5kg / 12.13lb, excluding yoke6.97kg / 15.37lb, including yoke
Dimensions	390 x 207.6 x 183.6mm / 15.35 x 8.17 x 7.23in, excluding yoke537.7 x 433.2 x 176.6mm / 21.17 x 17.06 x 6.95in, including yoke
Warranty	3 years on fixtures (5 years if registered), 12 months on accessories
Certifications	Pending: CE, UKCA, RCM, CSA, ETL, FCC
Control	On-board interface DMX via standard 5-pin XLR connectors wired remote control accessory integrated LumenRadio TimoTwo with BLE 1x etherCON USB Type A (500mA output)
Includes	Vortex2 Soft, yoke, power cable, XWIDE lens