Specs for the Vortex2

Specification	Vortex2
Power	160W
Light Zones / Pixels	2
Material	Aluminium / Technopolymer
Light Source	RRGBBW LED
Colour Range	CCT: 2200–15000K, Plus/Minus Green, Hue/Saturation, XY, Gels, Direct RGBW, Effects
CRI / TLCI	Typical 95
Beam Angle	20° half peak angle
Tilt Angle	360°
Photometrics	Open Face 3200K: 26,300 lx / 2,443.3 fc @ 1m / 3.3ft 7,260 lx / 674.5 fc @ 2m / 6.6ft 3,280 lx / 304.7 fc @ 3m / 9.8ft 1,850 lx / 171.9 fc @ 4m / 13.1ft 1,190 lx / 110.6 fc @ 5m / 16.4ft 835 lx / 77.6 fc @ 6m / 19.7ft Open Face 5600K: 27,500 lx / 2,554.8 fc @ 1m / 3.3ft 7,550 lx / 701.4 fc @ 2m / 6.6ft 3,410 lx / 316.8 fc @ 3m / 9.8ft 1,920 lx / 178.4 fc @ 4m / 13.1ft 1,240 lx / 115.2 fc @ 5m / 16.4ft 866 lx / 80.5 fc @ 6m / 19.7ft
Mounting	4x 3/8” threaded rigging points, 9x LNX sockets
Yoke	Removable quick release yoke; optional centre mount gooseneck accessory available
Filter Rails	2x front-mount filter rails for secondary lenses, diffusers, and accessories
User Interface	High precision digital magnetic encoder, backlit keypad, colour LCD display
Dimming	0–100% with high resolution, super-smooth low end mode
High Speed Capability	Over 5000fps flicker free in High Speed Mode
Synchronization	Sync input for triggering and syncing to camera shutter
Max Ambient Temperature	40°C / 104°F
Cooling	Low noise variable speed fans
Estimated LED Lifespan	50,000hrs, L70
Input AC	100–240V AC, 50/60Hz, Max 1.6A. Neutrik powerCON TRUE1 connector, pass-through capable
Input DC	48V DC, Max 3.3A. 3-pin XLR connector. Can run at 100% brightness on DC input
Protection Class	IP65
Weight	5.98kg / 13.18lb, excluding yoke7.45kg / 16.42lb, including yoke
Dimensions	390 x 207.6 x 183.6mm / 15.35 x 8.17 x 7.23in, excluding yoke537.7 x 433.2 x 176.6mm / 21.17 x 17.06 x 6.95in, including yoke
Warranty	3 years on fixtures (5 years if registered), 12 months on accessories
Certifications	Pending: CE, UKCA, RCM, CSA, ETL, FCC
Control	On-board interface DMX via standard 5-pin XLR connectors wired remote control accessory Integrated LumenRadio TimoTwo with BLE 1x etherCON USB Type A (500mA output)
Includes	Vortex2, yoke, power cable, XWIDE lens