FAQ
      Back to home
      1. Creamsource Knowledge Base
      2. Micro
      3. FAQ

      How to change the contrast of the LCD display on Micro Bender or Colour

      If you can't read the text on the display, follow these steps to change the contrast

      It is possible to adjust the contrast on the LCD display on the Micro Bender and Micro Colour.  If you can't read the text on the display, it is possible to adjust the contrast by following the button presses below 
      For a Micro Colour:
      • Power on Unit, wait a few seconds for it to boot up
      • Press MENU key
      • Press DOWN key 6 times select "Advanced" menu
      • Press RIGHT key to enter menu
      • Press DOWN key 3 times to select "LCD Contrast" menu
      • Press RIGHT key to enter menu
      • Press UP key several times to increase contrast (make darker), or DOWN key to decrease the contrast (make lighter)
      • Press the MENU key 3 times to exit the menu and save the settings
      For a Micro Bender:
      • Power on Unit, wait a few seconds for it to boot up
      • Press MENU key
      • Press DOWN key 5 times select "Advanced" menu
      • Press RIGHT key to enter menu
      • Press DOWN key 5 times to select "LCD Contrast" menu
      • Press RIGHT key to enter menu
      • Press UP key several times to increase contrast (make darker), or DOWN key to decrease the contrast (make lighter)
      • Press the MENU key 3 times to exit the menu and save the settings